If the bottom leg you are referencing on your Stromberg Carlson Electric Trailer Jack # JET-5000 is the foot pad, # 2500-3755G, then we do have a replacement.
If the bent leg is the tube that the jack foot goes into, that is not an available replacement part and the entire jack will need to be replaced with another # JET-5000.
I included videos of the products mentioned for you to take a look at. view full answer...
I really like the Ultra Fab Power Twin II part # UF39-941705 as it has two motors which allows it to move quicker and it fits a wider frame width range compared to other options as it fits frame widths of 48 to 80 inches. view full answer...
To upgrade to a higher spring bar rating with an Equal-i-Zer system you have to replace the bars and the head since the bars are all different sizes and the heads are made to fit them specifically. So for bars you'd need the part # EQ90-01-1299 and then for the correct head part # EQ90-02-1200 and you'd be set. view full answer...
I do have a suggestion, because we have a gas strut with with dimensions that are the same as the Stabilus 654150 which is likely to work; the Stabilus strut measures 26.46" when extended with 120 lbs of force.
The nearly identical strut we offer is the Solera Gas Strut for Short and Flat Awning Arms # LC280343.
The Solera strut also measures 26.46" when extended, as well as 15.04" when retracted, while exerting 124 lbs of force. So long as you can verify your strut has the same dimensions... view full answer...
I'd be happy to help you figure out if the replacement strainer # 34465JNBSK10081 will fit in the sink of your 2014 Keystone Cougar, but there's no database for what sink was used.
The # 34465JNBSK10081 measures 3" in diameter, so as long as then drain in your sink also measures 3" this will fit fine. If you find you have a different size just let me know and I'll see what options are available. view full answer...
Thank you for the part number info on the hubs of your 2016 Keystone Cougar Xlite based that we can tell you have a 4,400 lb trailer axle so for a replacement hub you'd want the part # 8-407-5UC3-EZ. Then for brake assemblies you'd want the part # K23-478-479 and you'd be set. view full answer...
Great questions.
I have solutions for both questions.
Lippert does not sell replacement bolts or hardware kits for this application you will be able to source the bolts you need from any local hardware store.
As for a replacement options I strongly recommend the MORryde StepAbove RV Steps for 23-3/4" to 26-1/4" Wide Doorways - 3 Steps # MR98RR. They are a solid step that offers great stability. No more worries if your steps are going snap off and cause a fall.
You just need to make... view full answer...